United is committed to providing its customers with properly sized equipment for their needs. Below is a general list of information needed for us to size your equipment.

DEHYDRATOR

1. Sales Line Pressure

2. Gas Temp

3. Flow Rate

4. A.S.M.E. Code or Non-Code

SEPARATOR

1. Sales Line Pressure

2. Inlet Temp

3. Gas Gravity

4. Flow Rate–Gas

5. Flow Rate–Fluid

6. Vertical or Horizontal

7. 2 Phase or 3 Phase (3 Phase will require fluid gravities)

8. A.S.M.E. Code or Non-Code

INDIRECT LINE HEATER 

1. Shut in Pressure

2. Flowing Tubing Pressure

3. Inlet Temp

4. Gas Gravity

5. Long Nose Adjustable Choke (yes/no)

6. Sales Line Pressure

7. Flow Rate (gas & liquids)

HEATER TREATER

1. Inlet Temp

2. Oil Gravity

3. Flow Rates (liquids)

4. A.S.M.E. Code or Non-Code

COALESCING FILTER SEPARATOR 

1. Working Pressure

2. Vertical or Horizontal

3. 2 Phase or 3 Phase

4. A.S.M.E. Code or Non-Code

TANKS 

1. Steel or Fiberglass

2. Internal Epoxy Coating Required for the Steel Oil or Water Tank

3. Inlet Temp Required on Fiberglass or Coated Tank

4. Type of Fluid Stored Required for Fiberglass or Coated Tank

5. Will Walkway be Required (Painted or Galvanized)

6. Four or More Tanks.  Will Setting be In-A-Line or Quad Type

FREEWATER KNOCKOUT 

1. Working Pressure

2. Mechanical or Pneumatic Liquid Level Controller

3. 2 Phase or 3 Phase

4. If 2 Phase, Is it dumping into a Heater Treater or Tank

5. Internal Epoxy Coating Required

6. A.S.M.E. Code or Non-Code

GUNBARRELS

1. Steel or Fiberglass

2. Internal Epoxy Coating Required for Steel (Water Section or Complete)

3. Method of flowing into Tank (Transport Truck or Production Stream)